欢迎光临常州蓝阳环保设备有限公司网站!
手机网站 | 联系我们:0519-81668662 | 加入收藏
  • 产品信息:吸附塔,常州吸附塔厂家【首选蓝阳环保】

    吸附塔,常州吸附塔厂家【首选蓝阳环保】

    产品型号: LY-SWCL1.0
    品  牌: 蓝阳
    • ≧2 台
      ¥64000.00
    所 在 地: 江苏常州
    更新日期: 2019-11-15
    详细信息
    吸附塔,常州吸附塔厂家【首选蓝阳环保】低温等离子废气治理工程,蓝阳环保设备有限公司生产的低温等离子体废气治理工程空气净化设备的性能特点:
    蓝阳环保,咨询热线: , ,欢迎您的来电垂询!~~
      1、“低温等离子体”设备属高新科技产品,自动化程度高,工艺简洁,操作简单,方便.无需专人看管,遇故障自动停机报警。
      2、节能:运行费用低廉是“低温等离子体”专利核心技术之一,处理5000M3/h臭气,耗电量仅1000W。

      3、适应范围广:在高温350℃,低温-20℃的环境内,净化区均可运转,特别是在潮湿,甚至空气湿度饱和的环境下仍可正常运行。

      4、设备使用寿命长:本设备由不锈钢材,铜材、陶瓷绝缘子等材料组成,抗氧化性强,在酸性气体中耐腐蚀。使用寿命长达5年以上。

      5、“低温等离子体”设备组合性强:可以窜并联混合应用,在处理高浓度异味气体时能发挥明显优势。

      等离子有机废气治理设备广泛用于:治理油烟粉尘领域,如大型火力发电厂、卷烟厂、纺织厂、印刷厂、造纸厂、钢铁厂、水泥厂等。治理废气、异味气体领域,如污水、垃圾处理厂、泵站、石化厂、化工厂、制药厂、卷烟厂、香精厂、屠宰场等。空气净化方面,如医院、餐饮、宾馆、娱乐场所、车船,航空候车室等公共场所、及办公室、家庭、轿车、实验室等。

      等离子有机废气处理设备的优势:

      在现实生活中,恶臭的物质很多,来源亦广,主要是由有机物的加热或燃烧,有机溶剂挥发,肉类加工的废液、废渣处理等产生的。皮革厂、喷漆厂、化工厂、制浆造纸厂、屠宰厂,垃圾站等都是恶臭的污染源。

      恶臭作为七大环境公害之一,对人体健康和生态环境会造成严重危害,轻者使人感到不适、出现头痛、头昏、恶心、呕吐、食欲不振和精神不集中等症状,重则对人的呼吸系统、循环系统、消化系统和生殖系统造成不同程度的毒害,其中芳香族化合物如苯、甲苯、苯乙烯等还能使人体产生畸变、癌变。为此必须对恶臭施行有效的控制和治理。

    一、酸雾净化塔设备概述 酸雾净化塔又称为酸雾处理塔,酸雾吸收塔/器,主要适用于硫酸、硝酸、氢氟酸、盐酸等工艺操作过程中产生酸/碱性气体的废气治理环保设备,酸雾净化塔具有净化效率高、结构紧凑,占地面积小、耐腐蚀、耐老化性能好,重量轻,便于安装、运输及维修管理等特点。

      二、酸雾净化塔的工作原理

      酸雾处理塔是酸雾废气净化不可缺少的设备,硫酸、硝酸、氢氟酸、盐酸等工艺操作过程中产生酸/碱性气体,废气通过引风机的动力进入高效填料塔,在填料塔的上端喷头喷出吸收液均匀分布在填料上,废气与吸收液在填料表面上充分接触,由于填料的机械强度大、耐腐蚀、空隙率高、表面大的特点,废气与吸收液在填料表面有较多的接触面积和反应时间。净化后的气体会饱含水份经过塔顶的除雾装置去除水份后直接排放大气中。酸雾处理塔的工作原理是将气体中的污染物质分离出来,转化为无害物质,以达到净化气体的目的。它属于微分接触逆流式,塔体内的填料是气液两相接触的基本构件,塔体外部的气体进入塔体后,气体进入填料层,填料层上有来自于顶部喷淋液体及前面的喷淋液体,并在填料上形成一层液膜,气体流经填料空隙时,与填料液膜接触并进行吸收或综合反应,填料层能提供足够大的表面积,对气体流动又不致于造成过大的阻力,经吸收或综合后的气体经除雾器收集后,经出风口排出塔外。废水在酸雾净化塔循环池中经加药处理后循环使用,沉渣定期清捞、外运。

      三、酸雾净化塔产品技术简介

      生产车间酸雾废气经风罩收集,经管道再进入碱液洗涤塔,碱液洗涤塔体放置二层填料层并配置二级水浴装置,并在循环水池内加氢氧化钠(简称碱),以中和废气中的酸雾,经二级喷淋塔装置清洗后完全能保证达标排放。

      塔体放置二层填料层并配置二级高压水浴装置,经二级喷淋装置清洗后,通过滤水装置,净气达标外排。

      酸雾净化塔是一种使含尘气体与水进行充分洗浴作用的除尘器,酸雾净化塔结构简单,主要由主体,进气管,排气管,喷头,填料层,加药装置,水源(水池)和水浴循环系统组成。

      它是使特定容器内含水率增加并改变气流方向、降低气流速度,让其与尘气体充分混合,使尘/气的比重增加并粘附中和,水尘由空气中脱离出来的一种除尘装置。

      四、酸雾净化塔产品优点:

      ⑴酸雾净化塔工艺简单,造价低,运行费用少,安装方便,耐腐蚀;

      ⑵性能稳定,除尘效率高,脱硫效果好;

      ⑶重量轻,便于安装、运输及维修管理;

      ⑷特别适应水溶性含尘气体;

      五、酸雾净化塔产品缺点:

      ⑴不适合干式物料回收利用;

      ⑵循环水如处理不好,易造成二次污染。

      公司拥有“有机气体催化、净化一体化装置”等几十种专有技术和产品,经过多年工况考核,系统运行平稳,处理效果尚佳,质量上乘,得到用户好评。

      公司坚定不移坚持“用户*,质量*,信誉*”的宗旨,以“人品铸就产品”的经营理念面向市场,向用户提供更多的优质技术和产品,为人类生存环境和产品质量的提高作出更大贡献。

      蓝阳环保是一家专业生产各种环保设备的企业。工艺设备先进,技术力量雄厚,具有完备的质量检测手段,有多年的生产实践经验。企业始终坚持“质量*,诚信服务,力求创新,开拓进取”的宗旨, 产品严格按照国家质量标准和客户要求的企业质量标准组织生产,并不断开展技术与产品的创新。由于质量可靠,得到了新老客户的广泛好评。

    Adsorption tower, Changzhou adsorption tower manufacturers [preferred Blue Sun environmental protection] low temperature plasma exhaust gas treatment project

    The performance characteristics of the air purification equipment of the low temperature plasma exhaust gas treatment equipment produced by the environmental protection equipment Co., ltd.:

    1, low temperature plasma equipment is a high-tech products, a high degree of automation, simple technology, simple operation, convenient, no need for special care, in case of automatic shutdown alarm.

    2, energy saving: low operating cost is one of the core patent technology, low-temperature plasma processing 5000M3/h odor, power consumption is only 1000W.

    3, adapt to a wide range: in the high temperature of 350 degrees Celsius, low temperature -20 DEG C environment, the purification area can be run, especially in the humid, and even the air humidity saturation environment can still run normally.

    4, long service life of equipment: This equipment is made of stainless steel material, composed of copper, ceramic insulator materials, oxidation resistance, corrosion resistance in acid gas. Service life of more than 5 years.

    5, low temperature plasma device combination is strong: can be mixed in parallel application, in dealing with high concentrations of peculiar smell gas can play a clear advantage.

    Plasma organic waste gas treatment equipment is widely used in the field of oil fume treatment, such as large thermal power plants, cigarette factories, textile mills, printing plants, paper mills, steel mills, cement plants, etc.. Treatment of waste gas, odor gas fields, such as sewage, garbage treatment plants, pumping stations, petrochemical plants, chemical plants, pharmaceutical plants, cigarette factories, flavor plants, slaughterhouses, etc.. Air purification, such as hospitals, hotels, catering, entertainment, travel, aviation and other public places, waiting room and office, family, car, laboratory etc..

    Advantages of plasma organic waste gas treatment equipment:

    In real life, there are a lot of malodorous substances, which are mainly produced by the heating or burning of organic matter, the volatilization of organic solvent, the waste liquid treatment of meat processing and the waste residue treatment. Leather factory, paint factory, chemical plant, pulp and paper mill, slaughter plant, garbage station and so on are the stench pollution source.

    The stench as one of the seven environmental hazards, will cause serious harm to human health and ecological environment, can make people feel discomfort, headache, dizziness, nausea, vomiting, loss of appetite and mental concentration and other symptoms, while on the respiratory system, circulatory system, digestive system and reproductive system caused by different degrees of toxicity. The aromatic compounds such as benzene, toluene and styrene can make the body produce distortion and canceration. Therefore, the effective control and treatment of odor must be carried out.

    A mist purification tower equipment overview of mist purification tower also known as acid treatment tower, acid absorption tower / device, mainly used in sulfuric acid, nitric acid, hydrofluoric acid, hydrochloric acid and other processes produced in the process of acid / alkaline gas emission control and environmental protection equipment, mist purification tower has high purification efficiency, compact structure, small occupied area corrosion resistance, aging resistance, good performance, light weight, easy installation, transportation and maintenance management.

    Two, the working principle of acid mist purification tower

    Acid fog tower is a mist exhaust gas purification indispensable equipment, sulfuric acid, nitric acid, hydrofluoric acid, hydrochloric acid and other processes produced in the process of acid / alkaline gas, exhaust gas through the power fan into the high tower, the absorption liquid in the upper nozzle packing tower is evenly distributed in the packing, the emission and absorption liquid full contact in packing on the surface, the mechanical strength of filler, corrosion resistance, high porosity, large surface characteristics, the emission and absorption liquid in the filler surface contact area and reaction time more. After the purification of the gas will be full of water through the top of the fog removal device to remove water directly discharged into the atmosphere. The working principle of acid mist treatment tower is the pollutants in the gas is separated into harmless substances, in order to achieve the goal of purifying gas. It belongs to the differential contact countercurrent, the tower body filler is a basic component of gas-liquid contact, the tower body into the external gas tower, gas into the filler layer, spray liquid from the top spray liquid and in front of the filler layer, and a layer of liquid film is formed on the packing, the gas flows through the gap filler. Contact with the packing film and the absorption or comprehensive reaction, the filler layer can provide a sufficiently large surface area, and not to cause too much resistance to the flow of gas, the gas absorption or after synthesis by demister after collection, is exhausted out from the air outlet outside the tower. In the water mist purification tower in a circular pool by adding recycled after treatment, regular cleaning out sediment transport.

    Three, mist purification tower products technology introduction

    By collecting hood workshop through the pipeline into mist exhaust, lye washing tower, lye washing tower body placed two filler layer and configuration of two level water bath device, and sodium hydroxide in the circulation tank (referred to as alkali), with mist and exhaust gas, the two stage spray tower after cleaning device can ensure complete compliance discharge.

    The tower body placed two filler layer and configuration of two stage high pressure water bath device, the two stage spray cleaning device, through the water filtering device, the net gas emission standards.

    Mist purification tower is a kind of dust the dust gas and water bath full effect, acid mist purification tower has the advantages of simple structure, mainly comprising a main body, intake manifold, exhaust pipe, nozzle, packing, dosing device, water (pool) and water circulation system.

    The utility model is characterized in that the water rate of the specific container is increased, the air flow direction is changed, the air flow velocity is reduced, and the dust gas is fully mixed with the dust gas, so that the specific gravity of the dust / air is increased, and the water is separated from the air
  • 留言
    标  题: *(必填)
    内  容: *(必填)
    联系人:
    邮  箱:
    手  机:
    固  话:
    *(必填)
    公  司: *(必填)
    地  址: *(必填)